McIntosh MA5200 Owner's Manual download pdf (Page 13)

Spade Lug or Wire Connections:

6. Connect the Loudspeaker hookup cables to the

MA5200 Negative Output Terminal and Positive

Output Terminal to the Loudspeaker Terminal

Connections being careful to observe the cor-

rect polarities. Insert the spade lug connector or

prepared section of the cable end into the terminal

side access hole, and tighten the terminal cap until

the cable is firmly clamped into the terminals so

the lugs or wire cannot slip out. Refer to figures L

and M.

Note: The illustration located on the separate folded

sheet “Mc2B” is for connection to an 8Ω

(ohms) Loudspeaker.

Refer to “General Information” Note 6 on page 4

for additional information.

WARNING: Loudspeaker terminals are hazard-

ous live and present a risk of electric

shock. For additional instruction on

making Loudspeaker Connections con-

tact your McIntosh Dealer or McIn-

tosh Technical Support.

7. Connect the MA5200 power cord to an active AC

outlet.

Connecting Loudspeakers

Figure L

Figure M

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

No comments

McIntosh MA5200 Owner's Manual Page 13