McIntosh MCD1100 Owner's Manual download pdf (Page 7)

Installation

The MCD1000 can be placed upright on a table or shelf

standing on its four feet. It also can be custom installed in a

piece of furniture or cabinet of your choice. The four feet

may be removed from the bottom of the MCD1000 when it

is custom installed as outlined below. The four feet together

with the mounting screws should be retained for possible

future use if the MCD1000 is removed from the custom in-

stallation and used free standing. The required panel cutout,

ventilation cutout and unit dimensions are shown.

Always pro-

vide adequate

ventilation for

your

MCD1000.

Cool operation

ensures the

longest possible

operating life

for any elec-

tronic instru-

ment. Do not

install the

MCD1000 di-

rectly above a

heat generating

component such

as a high pow-

ered amplifier.

If all the com-

ponents are in-

stalled in a

single cabinet, a

quiet running

ventilation fan

can be a defi-

nite asset in

maintaining all

the system com-

ponents at the

coolest possible

operating tem-

perature.

A custom

cabinet installa-

tion should pro-

vide the follow-

ing minimum

spacing dimen-

Installation

sions for cool operation. Allow at least 2 inches (5.08cm)

above the top, 2 inches (5.08cm) below the bottom and 1

inch (2.54cm) on each side of the CD Transport, so that air-

flow is not obstructed. Allow 17 inches (43.18cm) depth be-

hind the front panel. When a CD Disc is inserted or re-

moved, the panel clearance required in front of the mounting

panel is 3-3/4 inches (9.5cm). Be sure to cut out a ventila-

tion hole in the mounting shelf according to the dimensions

in the drawing.

7/8

12.38cm

17-

1/16

43.34cm

Cutout Opening for Custom Mounting

MCD1000 Front Panel

Custom Cabinet Cutout

10.16cm

12"

30.48cm

13-

1/4

33.66cm

2.54cm

Cutout

Opening

for

Ventilation

Cutout Opening

for Ventilation

Support

Shelf

Cabinet

Front

Panel

Chassis

Spacers

MCD1000 Side View

in Custom Cabinet

MCD1000 Bottom View

in Custom Cabinet

3/32

7.86cm

-7/32

15.79cm

17.78cm

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments

McIntosh MCD1100 Owner's Manual Page 7

Comments to this Manuals