McIntosh C500C Owner's Manual download pdf (Page 9)

The C500C, C500P and C500T can be placed upright on a

table or shelf, standing on their four feet. The four feet, may

be removed from the bottom of the C500C, C500P and

C500T when they are custom installed as outlined below.

The four feet, together with the mounting screws should be

retained for possible future use if the C500C, C500P and

C500T are removed from the custom installation and used

free standing. They also can be custom installed in a piece

of furniture or cabinet of your choice. The required panel

cutout, ventilation cutout

and unit dimensions are

shown.

Always provide ad-

equate ventilation for the

C500C, C500P and

C500T. Cool operation en-

sures the longest possible

operating life for any elec-

tronic instrument. Do not

install the units directly

above a heat generating

component such as a high

powered amplifier. If all

the components are in-

stalled in a single cabinet,

a quiet running ventilation

fan can be a definite asset

in maintaining all the sys-

tem components at the

coolest possible operating

temperature.

A custom cabinet in-

stallation should provide

the following minimum

spacing dimensions for

cool operation refer to the

illustration. Allow at least

2 inches (5.08 cm) above

the top of the C500C,

C500P and C500T, 2

inches (5.08cm) below the

bottom and 1 inch (2.54

cm) on each side of the

Controller/Preamplifier, so

that airflow is not ob-

structed. Allow 24 inches

(61.0cm) depth behind the

front panel

for Intercon-

nect Cables. Allow 1 inch

(2.54 cm) in front of the

Installation

4 -

7/8

12.38cm

17-

1/16

43.34cm

Cutout Opening for Custom Mounting

C500C

C500P

C500T

Front Panel

Cabinet Cutout

Cutout

Opening

for

Ventilation

Cutout Opening for Ventilation

Support

Shelf

Chassis

Spacers

C500C

C500P

C500T

Support Shelf

in Cabinet

Notes: Center the Cutout Horizontally on the unit.

For purposes of clarity, the above

illustration is not drawn to scale.

1/8

13.02cm

15/16

2.38cm

1/8

2.86cm

-3/4

37.47cm

14-

1/4

36.20cm

15"

38.10cm

1/2

24.13cm

C500C

C500P

C500T

Side View in a

Partially Open

Cabinet

Front

Panel

5.08cm

Opening for

Ventilation

mounting panel for clearance. When the C500C, C500P and

C500T are to be installed in cabinets refer to the illustra-

tion below . Be sure to cut out a ventilation hole in the

mounting shelf according to the dimensions in the drawing.

Interconnect Cables are supplied with the C500P

and C500T Preamplifiers and connect to the

C500 Controller.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Comments to this Manuals

No comments

McIntosh C500C Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for Audio amplifiers McIntosh C500C