McIntosh C500C Owner's Manual download pdf (Page 20)

Data Port Assigment

The Data Control Ports on the C500 Controller by default

are assigned to control just one input (1 thru 7) on the

Preamplifier.

In the following example there are two McIntosh CD

Players, one connected to the CD Balanced Input number 6

and the other CD Player connected to the CDR Unbalanced

Input number 5 on the Preamplifier. Both CD Players will

share the same DATA PORT number 6 by performing the

following steps:

1. Press the SETUP Push-button twice to access the Setup

Preamp Mode unless the C500C is already in the Setup

Preamp Mode.

2. Rotate the MENU Control until the Alphanumeric Dis-

play indicates D PORT _ _ _ _.

Input Selection and Title Reassignment

The C500 has nine Audio Inputs, which includes seven high

level inputs, two dedicated Phono Inputs and two external

processor loops. These inputs already have assigned titles

that will allow for immediate hookup, operation and enjoy-

ment.

If the default Input Titles for the High Level Inputs do

not match up with components in your system they may be

reassigned. The following example will illustrate how to re-

name the AUX Input to DVD2. When the Input Selector is

rotated to select what was originally the AUX Input, DVD2

will now appear on the Front Panel Alphanumeric Display.

Notes: 1. Unused Inputs may be switched Off so they will not

appear when going through the input source choices

using the LISTEN Control, RECORD Control or

when using the Remote Control. Refer to figure 25.

2. The Alphanumeric Display will indicate the default

Title for the Input number selected with a dot

appearing to the right of the Title. Refer to figure

26a.

Figure 26a

Figure 24

Figure 25

Figure 26b

Figure 27

Figure 23

5. Rotate the SELECT 2 Control to select On or Off for

“D/A INPut 1”.

6. Rotate the SELECT 1 Control to select the next input,

“D/A INPut 2”.

7. Rotate the SELECT 2 Control to select On or Off for

the next “D/A INPut 2”.

8. Repeat steps 6 and7 until all seven of the MDA1000

Input Assignments have been entered into the C500

Memory.

9. Rotate the MENU Control until the words “PROG DP

SUM” appears. Refer to figure 23.

10. Rotate the SELECT 2 Control to select the Digital Input

of the MDA1000 that the MCD1000 is connected to.

Refer to figure 24.

11. Press the SETUP Push-button to exit the Setup Control-

ler Mode.

3. The Input Titles choices available for the High Level

Inputs start with DVD2, AUX2, TUN2, SVR2, CDR2,

or CD2.

4. The PHONO MM and PHONO MC Inputs Titles are

fixed, however they may be switched On or Off.

1. Press the SETUP Push-button twice to access the Setup

Preamp Mode unless the C500C is already in the Setup

Preamp Mode.

2. Rotate the MENU Control until the Alphanumeric Dis-

play indicates “INPUT 3 TUN•” appears. Refer to

figure 26a.

3. Rotate the SELECT 1 Control until the Display indi-

cates “INPUT 2 AUX•”. Refer to figure 26b.

4. Rotate the SELECT 2 Control until the Display indi-

cates “INPUT 2 DVD2”. Refer to figure 27.

5. Repeat steps 3 and 4 until all the Inputs have the de-

sired Title or are switched Off.

6. If no other adjustments are to be made at this time,

press the SETUP Push-button to exit the Setup Preamp

Mode or proceed to the next desired Setup Preamp

Mode for adjustment.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Comments to this Manuals

No comments

McIntosh C500C Owner's Manual Page 20

Comments to this Manuals

Related products and manuals for Audio amplifiers McIntosh C500C