McIntosh MC2102 Owner's Manual download pdf (Page 19)

Packing Instructions

In the event it is necessary to repack the equipment for

shipment, the equipment must be packed exactly as de-

scribed and shown below.

The MC2102 Vacuum Tubes must be removed from the

Amplifier Tube Sockets and placed into the inside open-

ings of the four layer foam packing material. The foam

with the tubes located inside are placed into the Amplifier

Tube Cover and secured to the Chassis. Failure to do this

will result in damage to the Vacuum Tubes and possibly the

MC2102.

Four 1/4 - 20 x 2-1/4 inch cap screws and flat washers

must be used to fasten the unit securely to the Shipping

Skid. This will ensure the proper equipment location in the

Inner Carton. Failure to do this will result in shipping dam-

age.

Use the original shipping carton and interior parts only

if they are all in good serviceable condition. If a shipping

carton or any of the interior part(s) are needed, please call

or write Customer Service Department of McIntosh Labo-

ratory. Please see the Part List for the correct part numbers.

Quantity Part Number Description

1 034052 Shipping carton top

1 034051 Shipping carton bottom

2 034054 Foam Pad (top and bottom)

2 034186 Foam Pad (front and rear)

2 034187 Foam Pad (sides)

2 034180 Foam pack tube (ends)

2 034179 Foam pack tube (inside with

tube cutouts)

1 034136 Inner carton top

1 034137 Inner carton bottom

1 034008 Bottom pad

1 034161 Shipping skid

4 101212 1/4 - 20x2-1/4 cap screw

4 104058 Flat washer

1 2 ... 14 15 16 17 18 19 20

No comments

McIntosh MC2102 Owner's Manual Page 19