McIntosh C2200 Owner's Manual download pdf (Page 16)

Auto Tone

The Auto Tone Feature activates the TONE BYPASS Dy-

namic Memory Circuit. When the Auto Tone Feature is set

to the On position, the C2200 will automatically remember

for each Input whenever the Tone Bypass Circuit is On or

Off.

1. Press the SETUP Push-button to access the Setup

Mode.

2. The Front Panel Alphanumeric Display will change and

the Red LED above the SETUP Push-button will be il-

luminated.

3. Rotate the METER LIGHTS (Menu) Control until the

words AUTOTONE OFF appears. Refer to figure 15.

4. Rotate the BALANCE (Select) Control until the Front

Panel Alphanumeric Display indicates AUTOTONE

ON. Refer to figure 16.

5. Press the SETUP Push-button to exit the Setup Mode.

Figure 15

Figure 16

Power Control Triggers

Three of the C2200 Power Control Outputs are reassignable

from their default settings, allowing for various fuinctions

such as activating only when a given Input is selected.

In the following example the Power Control OUTPUT 2

Jack will be reassigned to function as TRIGGER B for the

PHONO Input.

1. Press the SETUP Push-button to access the Setup

Mode.

2. The Front Panel Alphanumeric Display will change and

the Red LED above the SETUP Push-button will be il-

luminated.

3. Rotate the METER LIGHTS (Menu) Control until the

words TRIG OUT2 > B appears. Refer to figure 11.

Note: If another TRIG Title is displayed, rotate the INPUT

Control to Select OUT2.

4. Rotate the BALANCE (Select) Control until the Front

Panel Alphanumeric Display indicates TRIG OUT2 >

- - . Refer to figure 12.

Figure 9

Figure 10

1. Press the SETUP Push-button to access the Setup

Mode.

2. The Front Panel Alphanumeric Display will change and

the Red LED above the SETUP Push-button be illumi-

nated.

3. Rotate the METER LIGHTS (Menu) Control until the

words INP AUX>AUX appears. Refer to figure 9.

Note: If another Input Title is displayed, rotate the INPUT

Control to Select the AUX Input

4. Rotate the BALANCE (Select) Control until the Front

Panel Alphanumeric Display indicates INP AUX>PH.

Refer to figure 10.

5. Press the SETUP Push-button to exit the Setup Mode.

Figure 12

Figure 11

5. Rotate the METER LIGHTS (Menu) Control until the

words TRIG PHONO>- - appears. Refer to figure 13.

Note: If another Input Title is displayed, rotate the INPUT

Control to Select the PHONO Input

6. Rotate the BALANCE (Select) Control until the Front

Panel Alphanumeric Display indicates TRIG PHONO>

B. Refer to figure 14.

7. Press the SETUP Push-button to exit the Setup Mode.

Figure 14

Figure 13

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Comments to this Manuals

No comments

McIntosh C2200 Owner's Manual Page 16

Comments to this Manuals

Related products and manuals for Audio amplifiers McIntosh C2200