McIntosh C2200 Owner's Manual download pdf (Page 11)

McIntosh A/V Control Center

How to Connect for Pass Thru Mode

The PASS THRU Mode on the C2200 allows it to be part

of a Multichannel System for the Left and Right Front

Channels, when it is connected to a McIntosh Multichannel

Processor such as the MX134.

Any of the C2200’s High Level Inputs may be used for

the PASS THRU Function. The C2200 default setting for

the PASS THRU feature needs to be changed in Setup.

Connect the basic system as outlined in the two previous

pages and then add the two following connections. The ex-

ample below uses the AUX Input for the PASS THRU

Mode.

How to Connect for Pass Thru Mode

1. Connect a Power Control Cable from the McIntosh A/V

Controller Power Control Zone A to the C2200 PASS

THRU Jack.

2. Connect an Audio Cable from the McIntosh A/V Con-

troller Zone A Front Left and Right Audio Outputs to

the C2200 AUX 1 INPUTS.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

McIntosh C2200 Owner's Manual Page 11