McIntosh MC275 Owner's Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
7
General Information, Cable Information, Introduction and Performance Features
XLR Connectors
Below is the Pin configuration for the XLR Balanced
Input, Input/Output Connectors on the MC275. Refer
to the diagram for connection:
PIN 1: Shield/Ground
PIN 2: + Output
PIN 3: - Output
Power Control Connector
The MC275 Power Control Input receives an On/Off
signal from +5 to +12 volts. The Power Control Output
will in turn provide a +12 volt Output Signal with a
current up to 20mA. An additional connection is for
controlling the green illumination of the MC275 Small
Signal Tubes when connected to
a compatible McIntosh Pream-
plifier or A/V Control Center
Power Control Output. The 1/8
inch stereo mini phone plug con-
nects to a McIntosh Preamplifier
or A/V Control Center Power Control Output.
Note: When it is desired to switch Off the green il-
lumination of the Small Signal Tubes, and the
MC275 is not connected to a McIntosh McIn-
tosh Preamplifier or A/V Control Center with
meter illumination control, connect a 1/8 inch
Mono mini phone plug to the POWER CON-
TROL IN jack.
Connector and Cable Information
PIN 2 PIN 1
PIN 3
PIN 1
PIN 2
PIN 3
Introduction
Now you can take advantage of traditional McIntosh
standards of excellence in the MC275 Tube Power
Amplifier. The 75 watt power output per channel
will drive any high quality Loudspeaker System. The
MC275 reproduction is sonically transparent and abso-
lutely accurate. The McIntosh Sound is “The Sound of
the Music Itself.
Performance Features
• Power Output
The MC275 is a Tube Power Amplifier with a capabil-
ity of 75 watts per channel into 4, 8 or 16 ohm Loud-
speakers with less than 0.5% distortion. It may also
be operated in mono at 150 watts into 2, 4, or 8 ohm
Loudspeaker.
• Unity Coupled Circuitry
The MC275 Power Amplifier uses the famous McIn-
tosh Patented Unity Coupled Circuit which provides
low distortion, extended frequency response and cool
operating output tubes.
• Multifilar Wound Output Transformer
The MC275 Output Transformer Windings are part
of the Unity Coupled Circuitry. There are two bifilar
wound primaries, one for the cathodes and one for
the plates. The secondary winding is wound together
with the primary windings. This provides very close
primary to secondary coupling. The result is flat fre-
quency response and wide power bandwidth.
• Balanced and Unbalanced Input
Balanced connections guard against induced noise and
allow long cable runs without compromising sound
quality.
• Sentry Monitor Tube Protection
McIntosh Sentry Monitor Tube Protection Circuits
ensure the MC275 will have a long and trouble free
operating life.
• Gold Plated Connectors and Tube Socket Con-
tacts
Gold Plated Input Jacks and Output Binding Posts
provide trouble free connections. Ceramic tube sock-
ets with gold plated contacts provide protection from
atmospheric contamination. Output Tube Sockets
include Air-Pipe cooling at their bases.
• Custom Gold Plated Jumper Bars
To facilitate the MC275 Power Amplifier Monaural
Parallel Mode of Operation, there are two Custom De-
signed Gold Plated Jumper Bars included. These bars
provide maximum power transfer and ease of connec-
tion to the Output Binding Posts.
• Special Power Supply
A regulated Power Supply, a very large core Power
Transformer and large capacitors ensure stable noise
free operation even though the power line varies.
• LED Tube Illumination
Tri-Color LEDs illuminate the small signal process-
ing tubes of the MC275. They indicate tube warm up,
normal and sentry monitor modes of operation.
• Titanium Chassis with Super Mirror Finish
The famous McIntosh Stainless Steel Chassis with
Super Mirror Finish ensures the pristine beauty of the
MC275 will be retained for many years.
INPUT
IN/OUT
Power
Control
Meter
Illumination
Control
Ground
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comments to this Manuals

No comments