McIntosh MHA100 User Manual download pdf (Page 2)

MHA100 McIntosh

HEADPHONE AMPLIFIER The Compendium

HEADPHONE OUTPUT SPECIFICATIONS: Headphone Power Output: 1W High

Selection; 250mW Normal Selection. Headphone Output Impedance: 8-40

Ohms; 40-150 Ohms; 150-600 Ohms.

ELECTRONIC SPECIFICATIONS: Power Output Per Channel: 50 watts. Speaker

Impedance: 8 Ohms. Rated Power Band: 20Hz to 20kHz. Total Harmonic

Distortion: 0.005%. Intermodulation Distortion: 0.005% maximum, if the

instantaneous peak power is 100 watts or less per channel with both channels

operating for any combination of frequencies from 20Hz to 20kHz. Dynamic

Headroom: 1.5dB. Frequency Response: +0,-0.5dB, 20Hz to 20kHz; +0,-3dB,

10Hz to 100kHz. Sensitivity: 300mV Unbalanced; 600mV Balanced. Maximum

Input Signal: 8V Unbalanced; 16V Balanced. Signal to Noise Ratio: 105dB.

Damping Factor: >150. Preamplifier Output: 3V (8V maximum). Preamplifier

Output Impedance: 500 Ohms. Voltage Gain: 36.5dB. Power Guard: <2%

THD with up to 16dB overdrive at 1kHz. Output Autoformer: for Headphones

(only). Power Requirements: 120V at 1.5 Amps. Standby Power

Requirement: <0.25 Watts.

DIGITAL AUDIO SPECIFICATIONS: Digital Coaxial Input Sample Rate: 16Bit, 24Bit-

32kHz to 192kHz. Digital Optical Input Sample Rate: 16Bit, 24Bit-32kHz to

192kHz. Digital AES/EDU Input Sample Rate: 16Bit, 24Bit, 32Bit-32kHz to

129kHz. Digital USB Input Sample Rate: 16Bit, 24Bit, 32Bit-32kHz to 192kHz.

CONNECTIVITY: Headphone Output: 1/4". High Level Inputs: 1 Unbalanced and 1

Balanced. Digital Coaxial Input: 1. Digital Optical Input: 1. Digital USB

Input: 1. Preamp Output: 1 Stereo. Power Control Output: Yes.

CONTROL: Tone Controls: 5 Step Bass Boost Control 0 to 12.5db (in 2.5dB steps) @

40Hz. Power Control Input: Yes.

MHA100 - Sold from 2014 - Current. S/N: ADQ1011~??????

Size: 5-9/16”H, 11-1/2"W and 1?"D. Weight: 26.5 lb. $4,500.00

1 2

No comments

McIntosh MHA100 User Manual Page 2