REAR PANEL
FEATURES
AND
CONNECTIONS
4. LEVEL 5 and 6
Set the controls fully clockwise to the THX (1 volt) reference position when using the amplifier
with a Mclntosh C39 or MX130 Control Center adapted for the Home THX® Audio System.
For use with other audio systems, set the controls as desired.
5. DISPLAY BRIGHTNESS (MAX/OFF)
(Flush mounted screwdriver control)
Adjust this control for the desired brightness of the front panel power level LED displays
when the room is darkened. When the room lighting returns to normal, the displays will also
return to their normal intensity. Turn the control fully counterclockwise to turn the displays
completely off. The front panel teal nomenclature retains normal illumination at all times.
6. MODE (NORMAL/BRIDGED)
Set this switch to NORMAL when channels 3 and 4 are being used separately. Set the switch
to BRIDGED when the two channels are connected together for bridged operation.
7. INPUTS 3 and 4
Connect cables from a preamplifier, control center or other accessory outputs to these
inputs.
8. LEVEL 3 and 4
Set the controls fully clockwise to the THX (1 volt) reference position when using the amplifier
with a Mclntosh C39 or MX130 Control Center adapted for the Home THX® Audio System.
For use with other audio systems, set the controls as desired.
9. THX® INPUT
Connect a shielded 25 conductor Subminiature "D" male-to-female computer type cable
from the 6 channel output connector on a Mclntosh C39 or MX130 to the MC7106 THX® input
connector. This cable will supply all six output signals from the Control Center for surround
sound operation. It also supplies the control signal to turn the MC7106 AC power on and off.
10. MODE (NORMAL/BRIDGED)
Set this switch to NORMAL when channels 1 and 2 are being used separately. Set the switch
to BRIDGED when the two channels are connected together for bridged operation.
11. INPUTS 1 and 2
Connect cables from a preamplifier, Control Center or other accessory outputs to these
inputs.
12. LEVELS 1 and 2
Set the controls fully clockwise to the THX (1 volt) reference position when using the amplifier
with a Mclntosh C39 or MX130 Control Center adapted for the Home THX® Audio System.
For use with other audio systems, set the controls as desired.
13. OUTPUTS 1 and 2, and BRIDGED OUTPUT
For separate channel operation, connect the Hot lead of a loudspeaker to the + (Plus)
RED upper terminal, and the Common lead to the - (Minus) BLACK lower terminal of each
channel.
For BRIDGED operation, connect the Hot lead of a loudspeaker to the + (Plus) RED upper
Channel 1, BRIDGED terminal, and the Common lead to the - (Minus) RED upper Channel
2, BRIDGED terminal.
8
(12 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals