McIntosh MX150 Owner's Manual download pdf (Page 41)

The User Menu allows for Source

Selection, Surround Mode, RoomP-

erfect Correction Modes, Voicing

Curve Selection, Trim Adjustments

and Zone B Control. Press the INFO

Push-button on the Remote Control

and the MX150 Operational Status

will appear On-Screen. Refer to

figure 76 on page 40.

Press the AM Push-button to

select RoomPerfect Global correc-

tion, Focus 1 correction or bypass

all corrections. Refer to figure 81.

Pressing the FM Push-button will al-

low selection of Focus corrections (2

thru 8) when they are measured and

stored into memory. Pressing one of

the numeric (1-8) Push-buttons will

directly access a specific Focus cor-

rections and numeric 9 Push-button

to access the Global correction.

Pressing the numeric 0 Push-button

will access the RoomPerfect Bypass

Mode.

Back

When the MX150 is in Setup Mode it is used for re-

turning to a previous Menu Screen.

Select

When the MX150 is in the Setup Mode it is used to

select the highlighted option.

Navigate  

The NAVIGATE  (Left) and  (Right) Push-buttons

move Left or Right through Menu Options. Also used

to activate the Trim Mode selecting the various Trim

Functions.

Reset of Microprocessors

In the event that the controls of the MX150 stop func-

tioning, there is a built-in user reset function. Press

and hold in the STANDBY/ON Push-button until the

Front Panel Information Display indicates “MCU

reset”. Refer to figure 79.

The MX150 will then switch Off. Press the STAND-

BY/ON Push-button to resume normal operations.

Note: The above condition is usually caused by

either interruptions in AC power and/or major

changes in voltage.

Figure 79

MCU reset

Enhanced Remote Control Operation

The McIntosh MX150 has been factory configured for

operating in a standard McIntosh Home Theater Sys-

tem. This consists of McIntosh Source Components

connected via data ports to the MX150. Using the

McIntosh Remote Control supplied with the MX150

it becomes possible to operate the basic functions of

the McIntosh Source Components with one remote

control.

In those Home Theater Systems where a non-

McIntosh Remote Control will be used control-

ling other types of equipment (such as a drop down

projector screen, room lighting, etc.), the MX150 has

an optional remote control operating mode known

as Enhanced Mode. This optional mode may also be

used when it is desirable to use the remote controls

supplied with each of the McIntosh Source Compo-

nents for complete operational functionality.

Note: If the Enhanced Mode of Remote Control oper-

ation is to be used, it is advisable to disconnect

any Data Control Cables between the MX150

and McIntosh Source Components to prevent

any unintended operation of those components.

To switch the Enhanced Remote Mode On, enter

the MX150 Setup Mode, select the System Setup

Menu, followed by the General Setup Menu and then

“Enhanced RC ctrl” menu item. Refer to page 34 in

this Owner’s Manual and page 7 of the MX150 Setup

separate sheet.

With the Enhanced Remote Control feature ac-

tive press the MENU Push-button on the Remote

Control and the User Menu will appear On-Screen.

Refer to figures 80 and 81. Also refer to the MX150

“User Menu-1” separate folded sheet contained in the

Owner’s Manual Packet.

Note: Note during the time User Menu appears On-

Screen, the Front Panel Information Display

will indicate “User Menu”

User Menu 

Source Selection

Surround Mode Selection

RoomPerfect Mode

Voicing Selection

Trims

Zone B Control



Figure 80

Figure 81

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments

McIntosh MX150 Owner's Manual Page 41

Comments to this Manuals

Related products and manuals for Supplementary music equipment McIntosh MX150