McIntosh Mac 1700 Owner's Manual download pdf (Page 7)

CABINET INSTALLATION

The MAC 1700 can be installed in furniture cabinets, or custom

built installations. If the unit is to be used on a shelf or table

top, mount it in the attractive MAC 15 WO cabinet.

Allow sufficient cabinet space for air circulation. Minimum

internal cabinet dimensions should be 15

inches wide,

inches deep, and 4¼ inches high. The back of the

cabinet should be left as open as possible for ventilation.

Proper ventilation will insure your receiver a long trouble free

life. A fan to circulate the air will further increase the life of

your receiver.

The MAC 1 700 installs easily from the front of the cabinet into

a panel cutout. Front panels of any thickness can be used.

Four screws into the bottom of the MAC 1700 through the

mounting shelf hold the unit firmly in place. Due to the weight

of the MAC 1700 we recommend the unit rest on a wooden

shelf of at least ½" thickness. Unless the MAC 1 700 is ade-

quately held in place vertical mounting should not be at-

tempted. If vertical mounting is used a fan delivering 50

cubic feet per minute must be used.

Since the MAC 1700 must rest on a shelf, locate the cutout

from the back of the panel. A template to help you make

mounting easy is in the packet that contains the owners manual.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

McIntosh Mac 1700 Owner's Manual Page 7