McIntosh MCD 7009 Operations Instructions download pdf (Page 9)

The DATA IN connection allows a Mclntosh Control Center Remote transmitter to operate a

wide range of functions on the MCD7009 player from the main area or a remote area.

Refer to the drawings of the various Mclntosh hand held remote controllers showing which

pushbuttons are active for controlling the MCD7009. The drawings also indicate several push-

buttons that perform player functions that are different from the markings on the remote

controller.

A keypad can also be used to control the MCD7009 in a remote area. Refer to the keypad

drawing which indicates which pushbuttons are active with the MCD7009.

The MCD7009 Remote Controller can also be used in a remote area of any Mclntosh remote

control system to operate the player by sending control signals to a wall mounted IR sensor. All

the MCD7009 Remote Controller pushbuttons are active in this configuration.

The cable connected from the DATA port uses single conductor shield wire with 1/8" mini

phone plugs. Connections are to the sleeve (-) and tip (+) of the plug.

THE REAR PANEL

AND HOW TO

CONNECT

Most of the operating functions of the MCD7009 can be controlled with the following Mclntosh

Remote Controllers and keypad. The pushbuttons active with the MCD7009 are shaded on the

drawings. Please note the pushbuttons that have specific functions when used with the

MCD7009 that are different from the normal functions of the pushbuttons.

CR10 REMOTE CONTROL

HOW TO

OPERATE

THE

MCD7009

WITH REMOTE

CONTROLLERS

FROM OTHER

MclNTOSH

REMOTE

CONTROLLED

PRODUCTS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 24 25

No comments

McIntosh MCD 7009 Operations Instructions Page 9