McIntosh MC205 Owner's Manual download pdf (Page 6)

Installation

The MC205 can be placed upright on a table or

shelf, standing on its four feet. It also can be custom

installed in a piece of furniture or cabinet of your

choice. The four feet may be removed from the bottom

of the MC205 when it is custom installed as outlined

below. The four feet together with the mounting

screws should be retained for possible future use if the

MC205 is removed from the custom installation and

used free standing. The required panel cutout, ventila-

tion cutout and unit dimensions are shown.

Always provide adequate ventilation for your MC205.

Cool operation ensures the longest possible operating

life for any electronic instrument. Do not install the

MC205 directly above a heat generating component

such as a high powered amplifier. If all the compo-

nents are installed in a single cabinet, a quiet running

ventilation fan can be a definite asset in maintaining

all the system components at the coolest possible oper-

ating temperature.

A custom cabinet installation should provide the fol-

lowing minimum spacing dimensions for cool opera-

tion.

Allow at least 6 inches (15.24cm) above the top, 2

inches (5.08cm) below the bottom and 1 inch (2.54cm)

on each side of the Power Amplifier, so that airflow is

not obstructed. Allow 19-1/2 inches (49.53cm) depth

behind the front panel. Allow 7/8 inch (2.22cm) in

front of the mounting panel

for clearance. Be sure to

cut out a ventilation hole in the mounting shelf accord-

ing to the dimensions in the drawing.

When the MC205 is installed together with other McIn-

tosh Components, check clearances on all components

before proceeding.

8-5/16"

21.11cm

17-1/16"

43.34cm

MC205 Front Panel

Custom Cabinet Cutout

Cutout

Opening

for

Ventilation

Cutout Opening for Ventilation

Support

Shelf

Cabinet

Front

Panel

Chassis

Spacers

MC205 Side View

in Custom Cabinet

MC205 Bottom View

in Custom Cabinet

12-1/4"

31.12cm

12-3/8"

31.43cm

11-1/2"

29.21cm

3-3/4"

8.57cm

Cutout Opening

for

Custom Mounting

15.24cm

Opening

for Ventilation

Center the

opening horizontally

with the

MC205 Chassis

15-3/4"

40.00cm

9-7/8"

25.08cm

11"

27.9cm

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comments to this Manuals

No comments

McIntosh MC205 Owner's Manual Page 6

Comments to this Manuals

Related products and manuals for Audio amplifiers McIntosh MC205