McIntosh CR12 Owner's Manual download pdf (Page 8)

Installation

The CR16 can be placed upright on a table or shelf, stand-

ing on its four 1 inch high feet. The four feet may be re-

moved from the bottom of the CR16 when it is custom in-

stalled as outlined below. The four feet together with the

mounting screws should be retained for possible future use

if the CR16 is removed from the custom installation and

used free standing. It also can be custom installed in a

piece of furniture

or cabinet of your

choice. The re-

quired panel cut-

out, ventilation

cutout and unit

dimensions are

shown.

Always pro-

vide adequate

ventilation for

your CR16. Cool

operation ensures

the longest pos-

sible operating

life for any elec-

tronic instrument.

Do not install the

CR16 directly

above a heat gen-

erating component

such as a high

powered ampli-

fier. If all the

components are

installed in a

single cabinet, a

quiet running ven-

tilation fan can be

a definite asset in

maintaining all

the system com-

ponents at the

coolest possible

operating tem-

perature.

A custom cabi-

net installation

should provide the

following mini-

mum spacing di-

mensions for cool

operation. Allow at least 2 inches (5.08 cm) above the top,

2 inches (5.08cm) below the bottom and 1 inch (2.54 cm)

on each side of the Control Center, so that airflow is not

obstructed. Allow 20 inches (50.8 cm) depth behind the

front panel. Be sure to cut out a ventilation hole in the

mounting shelf according to the dimensions in the drawing.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments

McIntosh CR12 Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Audio amplifiers McIntosh CR12