McIntosh MC-7108 User Manual

MC7108EIGHTCHANNELPOWERAMPLIFIER

REAR PANELAND HOWTO MAKECONNECTIONSCONTROL IN connector from the POWER CONTROL OUT connector on compatible Mcln-tosh products. The MC7108 POWER CONTRO

16. AC POWER CORDConnect the MC7108 to a live 50/60HZ, 120 volt AC wall outlet or a Power Control Relay.Do not connect the unit to an AC outlet on the

REAR PANELAND HOWTO MAKECONNECTIONS22. CHANNEL 1 AND 2 OUTPUTSStereo and Mono: Connect cables from each loudspeaker Common terminal to the Minus(-) or

EIGHT 40 WATTCHANNELS(4 PAIRS)11

SIX 40 WATTCHANNELS ANDONE 100 WATTBRIDGED PAIRCHANNEL12

FOUR 40 WATTCHANNELS ANDTWO 100 WATTBRIDGED PAIRCHANNELS13

TWO 40 WATTCHANNELS ANDTHREE 100 WATTBRIDGED PAIRCHANNELS14

FOUR 100 WATTBRIDGED PAIRCHANNELS15

16McINTOSHHOME THEATERSYSTEM #1HT-3 RightSurround5 CHANNEL OPERATING CONFIGURATIONWITH MX118 A/V TUNER CONTROL CENTERHT-3 LeftSurround

178 CHANNEL OPERATINGCONFIGURATION WITH C39 orMX130 A/V CONTROL CENTERINCLUDING REMOTE AREA "B".MCINTOSHHOME THEATERSYSTEM #2

SPECIFICATIONSPOWER OUTPUT, EIGHT CHANNELS40 watts per channel, minimum sine wavecontinuous average power output per chan-nel, all channels operating

CUSTOMINSTALLATIONDRAWINGRECOMMENDED VENTILATION CUTOUTIN MOUNTING SHELFMOUNTING SURFACESUPPORT SHELFOUTLINE OF UNIT

The numbers refer to the paragraphs on pages 6 through 9.

04023100BE092004

MC7108EIGHTCHANNELPOWERAMPLIFIER

IMPORTANTSAFETYINSTRUCTIONSTHESEINSTRUCTIONSARE TO PROTECTYOU AND THEMclNTOSHINSTRUMENT.BE SURE TOFAMILIARIZEYOURSELFWITH THEMCopyright 1993 © byMclnt

Your decision to own this piece of Mclntosh Stereo Equipment ranks you at the very topamong discriminating music listeners. You now have "The Bes

TAKE ADVANTAGE OF 3 YEARS OF CONTRACT SERVICEFILL IN THE APPLICATION NOW.Your MC7108 Eight Channel Power Amplifier will give you many years of satisfa

Mclntosh Laboratory has earned a world wide reputation for its technical contributions toimproved sound reproduction. The technical innovations in Mcl

HOW TO INSTALLTHE MC7108Allow at least 1-1/2 inches (3,8cm) above the heat sink area to allow the free flowof air. The recommended minimum depth for m

3. LEVEL (BRIDGED, STEREO and MONO)BRIDGED; Use only the 7 BRIDGED LEVEL control and adjust as desired.STEREO: Adjust the individual 7 and 8 LEVEL con